Question 1

Can you move a gas cooker point to a new position in my kitchen?

Accepted Answer

Yes. We can reroute the gas supply pipework to reposition a cooker point as part of a kitchen redesign, always finishing with a full tightness test on the new connection so the relocated point is confirmed safe before you use it.

Question 2

What is a gas tightness test and why does it matter?

Accepted Answer

A tightness test checks the entire gas connection for any leaks after the appliance is fitted, using a pressure gauge. It is a mandatory safety check we carry out on every installation, giving you confidence the connection behind your cooker or hob is safe.

Question 3

How long does it take to install a gas cooker or hob?

Accepted Answer

A straightforward like-for-like installation typically takes around 30 to 60 minutes, including the safety tightness test. If new pipework is needed, this can take longer, which we will confirm before starting rather than surprising you on the day.

Question 4

Do you offer free quotes and estimates?

Accepted Answer

Yes, we provide free, no-obligation surveys and fixed written quotes for boiler installations, central heating work, and most plumbing jobs, so you know the full cost before agreeing to any work.

Question 5

Can you install a range cooker in Lumb?

Accepted Answer

Yes. Alongside freestanding gas cookers and built-in hobs, we install range cookers as well, connecting each appliance safely and finishing with a full gas tightness test regardless of size or configuration.

Question 6

What happens if you find a gas leak during the tightness test?

Accepted Answer

We will not leave the appliance connected until the leak is fixed. The tightness test is designed to catch exactly this before you ever use the cooker, and we address any fault found before signing the job off as safe.

Question 7

Do I need to be present while you fit the cooker or hob?

Accepted Answer

It helps if you, or someone who can make decisions about the appliance, is available at the start and end of the visit. We will talk you through what has been done and confirm the tightness test result before we leave.

Question 8

How can I check if an engineer is Gas Safe registered?

Accepted Answer

Every genuine Gas Safe registered engineer carries a Gas Safe ID card, and you can independently verify any engineer or business on the official Gas Safe Register website using their registration number. Our Register No. is 640113, and we are always happy for customers to check this themselves before any work begins.

Question 9

Do I legally need a Landlord Gas Safety Certificate (CP12)?

Accepted Answer

Yes, if you are a landlord renting out a property with gas appliances in England and Wales, you are legally required to have a Gas Safety Certificate (CP12) issued annually by a Gas Safe registered engineer. This applies to all gas boilers, gas fires, gas cookers, and any other gas appliances. Failure to comply can result in fines of up to 6,000, pounds prosecution, and even imprisonment. We provide prompt certificates for landlords and letting agents across Colne and the surrounding Lancashire area.

Question 10

What should I do if I smell gas near my cooker?

Accepted Answer

Turn off the gas supply at the meter if safe to do so, ventilate the room by opening windows and doors, and avoid naked flames or electrical switches. Call the National Gas Emergency Service on 0800 111 999 if you suspect a leak, then contact us afterwards during working hours for any repair.

Safe Gas Cooker and Hob Installation in Lumb

Signs You Need Gas Cooker and Hob Installation in Lumb

How It Works

Book your installation

Safe connection

Tightness test

Handover

Why Choose Us in Lumb

Other Services in Lumb

Gas Cooker and Hob Installation in Nearby Areas

Gas Cooker and Hob Installation in Lumb FAQs

Ready to Get Started?

Get Your Free Quote